Soldering Fluid
Far superior to salts or powder fluxes, Our Soldering Fluid enables all solders to flow at their lowest possible temperature, yet it protects your work at higher temperatures without burning away. Your solder joints will be stronger and less solder will drop off your work.
Soldering Fluid contains no free acid. It is highly active when heated (becomes active at 150°F) yet it is nearly inactive when cold. Any method of heating for soldering may be used with this flux,
Solder Paste
Many industrial uses still exist for this easy-to-use Flux-'N-Solder combination. This formula contains 50/50 powdered solder (50% lead),and therefore must not be used when soldering drinking water systems, food handling equipment, livestock tanks, etc.
Due to its relatively low melting temperature (360-420°F) and its rapid tinning action, this paste is excellent for soldering automotive components and other assemblies. Residues are water soluble and should be removed after soldering.
C-7 Rosin Flux-'N-Solder is an excellent medium-tech non-corrosive paste solder for electrical connections, and other easy-to-solder components. Melting range is 360-374°F.
Email This Page to a Friend
